Product Description
E22 60V 30A Charger for Electric Motorcycles & Tricycles β High-Power IP65 Fast Charger
ποΈ Electric Motorcycles / Tricycles
π§ IP65 Waterproof
π Aluminum Die-Cast
π Lead-Acid / LiFePO4 / Li-ion
The E22 60V 30A Charger is specifically engineered for electric motorcycles, electric tricycles, and high-power two/three-wheel EVs. Built with a rugged IP65-rated aluminum die-cast casing, it resists dust, water jets, and road vibrations. This charger delivers a powerful 30A output at 60V nominal, significantly reducing charging downtime for large battery packs. Compatible with Lead-Acid, LiFePO4, and Lithium-ion batteries, it ensures safe, efficient charging for daily commuting, cargo trikes, and fleet vehicles.
βοΈ Technical Specifications & Multi-Layer Protections
100-240VAC (50/60Hz) β worldwide compatibility. Output power derates when input below 120Vac.
Aluminum die-casting | IP65 waterproof (dust-tight, protected against low-pressure water jets) | Operating temp: -20Β°C to +50Β°C
Input over-voltage
Overheat protection
Output overcurrent
Output overvoltage
Short circuit protection
Reverse polarity (optional)
Optional CANBUS or RS485 communication for BMS integration, remote monitoring, and dynamic charge control. Perfect for connected fleets and smart charging stations.
π Battery Compatibility & Output Reference Table
Based on battery chemistry, cell configuration, and capacity, the E22 platform supports various nominal voltages. The table below lists typical charging voltages. For the 60V 30A model, maximum output current can reach 30A @ 60V (Li-ion/LFP profiles). The reference current values shown in the table are for standard configurations; custom 30A at 60V is available upon request.
| Rated Voltage | Lead Acid Battery | LiFePO4 Battery | Lithium ion Battery | Charge Current (Standard) @220Vac |
|---|---|---|---|---|
| Current (A) | ||||
| 12V | 14.7V | 14.6V | 16.8V | 30A |
| 24V | 29.4V | 29.2V | 29.4V | 30A |
| 36V | 44.1V | 43.8V | 42.0V | 30A |
| 48V | 58.8V | 58.4V | 58.8V | 25A |
| 60V | 73.5V | 73.0V | 67.2V | 20A* (30A available for E22-60V/30A variant) |
| 72V | 88.2V | 87.6V | 84.0V | 15A |
| 84V | 102.9V | 102.2V | 100.8V | 12A |
| 96V | 117.6V | 116.8V | 117.6V | 10A |
πΈ Product Gallery β E22 60V 30A Series
π Flexible AC & DC Connectivity
AC plug options: Customizable to meet regional standards (US, EU, AU, UK, etc.). The length and wire diameter of the AC cable are optional; if no special requirements, appropriate specifications will be matched to the model.
DC cable & connector: Fully customizable length and wire gauge (e.g., 10AWG for 30A). Customers may also provide their own connectors β we will match with strain relief and waterproof sealing. Standard options include Anderson SB50, XT90, or ring terminals for secure high-current connection.
ποΈ Optimized for Electric Motorcycles & Tricycles
- High-speed e-motorcycles β 30A fast charging reduces downtime, ideal for daily commuting or delivery fleets.
- Cargo & passenger tricycles β IP65 protection withstands wet roads and dust.
- Electric scooters & mopeds β Compact size and aluminum housing for onboard or garage charging.
- Fleet vehicles (last-mile delivery) β Optional CANBUS enables remote monitoring and charge scheduling.
- Off-road electric ATVs β Vibration-resistant construction ensures reliability on rough terrain.
π‘ Why Choose the E22 60V 30A Charger?
- β True 30A output at 60V β Up to 2x faster than standard 15A chargers.
- β IP65 die-cast aluminum housing β Weatherproof, dustproof, and thermally efficient.
- β Universal 100-240VAC input β Works worldwide without voltage selector.
- β Multi-chemistry support β Lead-Acid, LiFePO4, Lithium-ion with programmable algorithms.
- β Safety certified β Overload, overheat, short circuit, and reverse polarity protection.
- β Optional CAN/RS485 communication β Seamless integration with smart BMS and IoT platforms.
